Kits

BasicSnakeTrailing Shield

weldhugger basic kitThe Basic Weld Hugger Kit » ONLY $249.95

Includes six gas distribution nozzles, a gas supply tube manifold and the screws and O-ring seals required to attach the nozzles to the manifold. The manifold tube is 1/4″ OD 316L stainless steel and can be connected to the gas supply with standard tube connection fittings.

Basic Kit Contents:

  • Gas Supply Tube Manifold: 0.25″ OD x 0.035″ wall, 10″ long, right angle gas flow (BNMAN10)
  • Nozzle Plates:
    1. 1″ x 1.75″ bottom feed
    2. 1.25″ x 1.75″ top feed
    3. 1″ x 3″ bottom feed
    4. 1″ x 3″ top feed
    5. 1″ x 4″ bottom side feed
    6. 2.75″ x 3″ bottom feed

WeldHugger Snake KitSnake Kit » JUST $349.95

Gives the welder a mobile, “Third Hand” to easily position the Weld Hugger nozzle in different set-ups. This kit includes everything in the Basic kit and a snake, or gooseneck, hose assembly.

The primary elements of the snake hose assembly are a 14″ flexible, bendable hose that adjusts to virtually any position without wandering and a heavy duty base magnet.

“Snake” Kit Contents:

  • Gas Supply Tube Manifold: 0.25″ OD x 0.035″ wall, 10″ long, right angle gas flow (BNMAN10)
  • Nozzle Plates:
    1. 1″ x 1.75″ bottom feed
    2. 1.25″ x 1.75″ top feed
    3. 1″ x 3″ bottom feed
    4. 1″ x 3″ top feed
    5. 1″ x 4″ bottom side feed
    6. 2.75″ x 3″ bottom feed
  • Snake Hose Assembly:
    1. 14″ Gooseneck hose with fittings
    2. Base magnet
    3. Manifold adaptor
    4. Ball valve
    5. Compression adaptor fitting

Trailing Shield KitBendableThe Trailing Shield Kit » ONLY $249.95

Includes six gas distribution nozzles, a gas supply tube manifold, screws and O-ring seals. The nozzles and the manifold are 316L stainless steel. The manifold is configured to provide straight gas flow from the tube which will facilitate setting up the Weld Hugger for many trailing shield applications.

Trailing Shield Kit Contents:

  • Gas Supply Tube Manifold: 0.25″ OD x 0.035″ wall, 10″ long, straight gas flow (BNMAN10S)
  • Nozzle Plates:
    1. 1″ x 1.75″ bottom feed
    2. 1.25″ x 1.75″ top feed
    3. 1″ x 3″ bottom feed
    4. 1″ x 3″ top feed
    5. 1″ x 4″ bottom side feed
    6. 2.75″ x 3″ bottom feed